Garage Door Opener Maintenance
Your garage door opener will last longer and perform better if you take a little time to service it. A simple garage door balance check, once in every four weeks, will ensure that your door isn't causing stress to its opener, and yearly lubrication of the opener and the door will ensure the smoothest operation possible.
Follow the following garage door opener maintenance tips in Denver to increase the durability of your garage door opener:
Inspect your garage door regularly
The first step to garage door opener maintenance in Denver is inspect your door rollers, cables, springs and other hardware regularly. Ensure that the rollers are working well, the springs are elasticated and that the cables are still intact. Watch out for signs such as broken parts and wear.
As homeowners, you should only try doing minimal maintenance work, as other complicated tasks should be performed by a professional garage door service provider. Garage door springs, as well as other hardware, are always under high tension, and they can lead to injuries if they aren't maintained. If you are based in and around Denver, you can choose to hire the services of Denver Garage Door Specialists to help inspect and maintain your garage door.
Lubricate your garage door and opener regularly
The second step to garage door opener maintenance is lubricate both, the door and the opener. Garage door hinges, tracks, rollers and springs should be lubricated regularly. However, if you are not comfortable doing this yourself, hiring professional services can be of immense help for garage door opener maintenance in Denver.
Test your door balance
To avoid stressing the opener, you need to test the balance of your garage door regularly. When the door is closed, disconnect the automatic door opener release system, and then open the door with your hands. If your door is working well, it should raise smoothly and with no resistance. Additionally, the door should open about four or five feet above the floor. If it doesn't, then it's out of balance and needs to be fixed by a qualified service provider.
Test the force of the garage door opener
You need to test your garage door opener force regularly. How do you test this? You can test the force of the opener by holding the base of the door as it closes. If your garage door does not reverse, then the force could be excessive and need to be adjusted. You can consult a garage door opener maintenance professional on how to adjust it, or see the garage door manual.
Install safety devices
Most garage door openers have special safety gadgets, such as photo-eyes and edge sensors, to avoid entrapment. Additional devices need to be installed correctly and given a regular checkups to make sure that they are still functioning well.
To avoid entrapment, you need to do the one inch reversing test after any adjustments or garage door opener maintenance or the door. Place a 2 by 4 piece of wood on the ground in the garage door's path before activating the door. If it doesn't stop and reverse after hitting the wood, disconnect the opener until the system is repaired. Immediately call specialist for any garage door repair Denver. Regular maintenance of your garage door and the opener can prevent serious damages as well as injuries.